Chemix Specialty Gases and Equipment

Multi-Component Gas Mixture

Leading Manufacturers, Trader, Exporters and Wholesaler of 2-Component Calibration Gas Mixture, 3-Component Calibration Gas Mixture and 4-Component Calibration Gas Mixture from Bangalore.

Business Type Manufacturer
Brand Name Chemix
Country of Origin India

Preferred Buyer From

Location Anywhere in India

We are a renowned Calibration Gas mixture manufacturer, supplier and exporters in India. We provide these Calibration Gas Mixtures in Percentage, PPM (Parts per Million) and PPB (Parts per Billion) range. Calibration Gas is a mixture of two or more gases blended together along with a carrier gas, and is used as a reference gas to calibrate various analytical instruments, gas analyzers and gas detectors of a laboratory or research center. The good / accurate calibration gas must always be accompanied by traceability. Traceability is comparison/deviation to national or international standard. Also, PTL (Preparation Tolerance Level) and CA (Certification Accuracy) plays a major role in providing an accurate calibration Gas mixture. Accuracy in all respect is a necessity for any Calibration gas mixture because based on this reference gas mixture only, various analytical instruments gets calibrated which in turn are further used to detect various components in air or any chemical. Calibration Gas Mixture can be supplied in carbon alloy steel cylinders or aluminum cylinders.

 

Contact us with your specific needs, we provide all types of combinations

MSDS furnished on request

 

+91-9945075154

alroysge@gmail.com

Read More...


Yes! I am interested


Business Type Manufacturer
Brand Name Chemix
Country of Origin India

Preferred Buyer From

Location Anywhere in India

3-Component Gas Mixtures have a mixture of multiple ideal gases which are present in equal percentage or amounts. As the pressure of the gas mixtures depends on the total number of particles of gas present, therefore the total pressure of the mixture will simply get doubled the pressure of either components. More or less, the total pressure exerted by a mixture of gases at any given temperature or volume is the total sum of the pressures exerted by an individual gas present in the mixture. Furthermore, if we are aware of the volume, temperature, and the number of moles of each gas in a mixture, then we surely can calculate the pressure which is exerted by an individual gas that is its partial pressure. Pressure the 3-Component Gas Mixtures would exert if it were the only one present.

 

Contact us with your specific needs, we provide all types of combinations

MSDS is furnished on request

 

+91-9945075154

alroysge@gmail.com

Read More...


Yes! I am interested


Business Type Manufacturer
Brand Name Chemix
Country of Origin India

Preferred Buyer From

Location Anywhere in India

4-Component Gas Mixtures are the combination or blending of multiple gases to serve multiple purposes where the constituents are specified and managed easily. The parent gases that are used in the product are Carbon dioxide acquiring the composition up to 0.30 %, Methane is also around 0.30%, percentage of oxygen is 21.06 % and the remaining ratio of nitrogen is balanced. The gas mixture is very efficient and at the same time significant in petrochemical industries. 4-Component Gas Mixtures are offered in seal packed iron and steel alloyed cylinders which are quiet heavy and the rust proof. The Volumetric gas fraction is responsible to transmit trivially to partial pressure ratio that follows Dalton's law of partial pressures.

 

Contact us with your specific needs, we provide all types of combinations

MSDS Furnished on request

 

+91-9945075154

alroysge@gmail.com

Read More...


Yes! I am interested



Looking for Product Name ?

Raise your Query

Hi! Simply click below and type your query.

Our experts will reply you very soon.

WhatsApp Us