|Business Type||Manufacturer, Trader|
Preferred Buyer From
|Location||Anywhere in India|
Gas Pressure Regulator - an essential tool for gas handling system - is a device to control ‘downstream pressure’ from ‘upstream source’ in line with required working pressure that allows optimum gas to flow into the system. To use in Specialty Gases, the regulator must be made with stainless steel or chrome-plated brass depending on the purity level and corrosiveness of the pure gas or gas mixture. For Specialty gas Application Pressure Regulator are fitted with stainless steel diaphragm and mechanically linked to the poppet assembly to provide sealing integrity. Apart from being a high sensitive control device proper sealing diaphragm also prevents the diffusion of atmospheric oxygen into the carrier gases. For Pressure control either stainless steel Diaphragm (for low and medium pressure at downstream) or stainless steel Piston (for high downstream pressure) being used. Reduction of pressure in the regulator can be done either in single stage (one step Reduction) or in Double stage (Reduction in two steps). Inlet Pressure gauge indicates cylinder pressure or the source pressure. Outlet Pressure gauge indicates the pressure at which it is being delivered in the system.
How do you order for a Pressure Regulator? – There are two ways
We are given below a chart as a guide for selection of regulators. In case all parameters are not known to the user, at least working pressure, gas service and mounting can be intimated to us so that we can decide on the model and supply suitable regulator.
Contact us with your specific needs, we provide all types of combinations
Regular Selection Guide
|Body & Stages(A)||Pressure Reducing Method(B)||Upstream Pressure gauge Range(C)||Delivery Pressure gauge Range(D)||Inlet Connection(F)||Outlet Connection(G)|
|Single Stage Chrome plated Brass A1||Diaphragm(SS 316) D||0-300 bar(0-4500 psi)C1||0-17m bar (0-25psi) D1||5/8" BSP RH F1||1/4" Nut Ferrule G1|
|Single Stage Stainless Steel 304 A2||Piston P||0-280 bar(0-4000 psi)C2||0-2.1 bar (0-30psi)D2||5/8" BSP LH F2||1/2" Nut Ferrule G2|
|-||-||0-7 bar (0-100 psi)D3||-||-|
|Single Stage Stainless Steel 316 A3||-||0-125 bar (0-1781 psi) C3||0-16 bar(0-230psi) D4||1/4" FNPT F3||4mm-12mm Push Fit G3 1/4"|
|Double Stage Chrome plated Brass A4||0-40 bar(0-570 psi) C4||0-10 bar (0-150 psi) D5||1/2" FNPT F4||1/4" FNPT F3||1/4" MBSP/NPT G4 1/2"|
|Double Stage Stainless Steel 304 A5||-||0-16 bar(0-300 psi)C5||0-100 bar (0-1500psi)D6||1" FNPT F5||MBSP/NPT G5|
|Double Stage Stainless Steel 316 A6||-||0-7 bar(0-100 psi)C6||0-150 bar(0-2100) D7||-||-|